××

Moneymaker Console

connecting
0%printed by weight

The build

queued
printing
printed
prepped (supports out, holes drilled, dry-fit)
glued in
failed
Tap a piece to see what it is and where its print file is. P-numbers are debossed on a hidden joint face of each piece.

Prints

One square per print. Tap a group for its prints, files and numbers.

Tests & gates

T0 hole that fits with light finger pressure:

T0 gates every job: the joint-pin holes are cut for a pin that slides in the "15" hole. If yours fits a different hole, tell Claude the number before printing anything else, and every hole gets re-cut.

LOCK gates the vault floor, sill, door frame, door, hatch, bay door, money, lid and band. Until it passes, "next up" skips them and keeps the printers busy on everything else.

Two jobs need a pause to drop in the captive lock-pin heads (the door frame and the hatch, plus the T1/T2 tests). Print the small-parts plate first and glue the magnets into the heads.

Assembly

Tap a piece chip to move it on: printed → prepped → glued. A step goes green when every piece in it is glued.

Checklists

Shopping
Activity

Docs

Old build (1207 mm, v4)

The old tracker and its files are kept at /v4.html. Its statuses are untouched.